Back

Cart Mounted Dispenser

The cart mounted dispenser is produced by mounting a 100ml glass topped, wall mounted catalyst dispenser on a two-wheeled cart designed to carry a 30kg keg of MEKP catalyst.
The cart enables the catalyst dispenser to be placed adjacent to the working area - particularly useful for large mouldings - and then wheeled outside at the end of the shift for storage. The cart is fitted with a drip-pot and a keg retainer.

WARNING: Safety eye goggles should always be worn when handling catalyst.

Order ref.
AOO 16034
Output 600ml/min

To obtain more information about this product please visit the Information page or click HERE

600ml Wall Mounted Dispenser

The 600ml dispenser is a large capacity hand operated metering pump which will dispense MEKP catalyst, polyester phenolic and epoxy resins and polyester gelcoats.
The dispenser is supplied with a wall-mounting bracket which enables it to draw material directly from a 200 litre drum positioned beneath it. The maximum capacity per cycle is 600ml and multiple cycles can be produced without difficulty.

Note: Gelcoats must be at a minimum temperature of 18°C

WARNING: Safety eye goggles should always be worn when handling catalyst.

Order ref.
AOO 16033
Output 3000ml/min

To obtain more information about this product please visit the Information page or click HERE