Resin Glass Spray Unit
 
Based on the highly successful type C unit, this new resin glass spray unit incorporates the features that research and long experience have shown are most needed by the GRP industry. Simple to operate and with a minimum of moving parts, the type D unit is constructed for hard work and high output. In operation, accelerated resin is pumped direct from drums or bulk storage tanks and fed to a single head gun where it is catalysed automatically. Output is up to 7 kg per minute. Catalyst is drawn straight from the manufacturer's container and fed into the resin through a hollow needle in the gun where it is mixed thoroughly. The catalyst pump is connected directly with the resin pump to ensure accurate metering. Catalyst percentages can be set at 0.25%, 1.5% or 3%, even with the unit running. By using a different catalyst pump hose (supplied with the machine) catalyst outputs of 1.5%, 1 % and 2% can be obtained

The catalyst pump is valve less, and at no time is the catalyst under excessive pressure. This is a particularly safe system approved by catalyst manufacturers. As the resin and catalyst are mixed at the point of exit, the spray head does not require internal flushing simply place the gun head in the integral solvent bath to ensure perfect cleanliness.

A new lightweight single-head spray gun gives an improved spray pattern, ensuring a positive and complete wet-out of the chopped rovings. The gun is built for continuous use in production conditions. The glass fibre depositor is operated by a high speed pneumatic motor. It will accept 1 or 2, 60 end glass rovings to match the resin output. Roving length is adjustable between 1/2" (12.7mm) and 2 1/2"(63mm). The equipment is supplied as a trolley mounted unit complete with boom for hoses and rovings. The catalyst and resin drums are carried on the trolley. This equipment can also be supplied as a wall-mounted unit with a separate wall-mounted boom.

SPECIFICATIONS
Overall height 2250mm
Boom Length 3600mm
Hose Length 7000mm
Clearance beneath boom 1900mm
Air Consumption 11.8 l/sec
Max resin/glass output 7.8 kg/min
   

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

Telephone +44 (0)1379 642660 FAX +44 (0)1379 650304
Postal address Spa House, Shelfanger, Diss, Norfolk, IP22 2DF, England
Webmaster: W Clendening
  General Information: kcmouldings@kcmouldings.co.uk
Customer Support: kcmouldings@kcmouldings.co.uk
Orders and sales information: sales@kcmouldings.co.uk