The Glass-Craft INDy is a resin.glass dispenser system that represents the third generation of Glass-Craft's non-atomising technology. It has been tested, proven and documented to be the absolute best device for reducing styrene emission in open mould processing.
The INDy dispense system with chopper gun is supplied in cart-mounted form with integral hinged boom to carry hoses and rovings. It is fitted with a heater which maintains the temperature to enable the ideal spray patterns to be maintained.
The air motor pump ratio is 11:1 which allows the INDY to pump fire retardent and filled resins with minimal output reduction and maximised efficiency. The INDy has an internal mix spraygun which matches perfectly the well proven B-140 choppers. An integral flushing system is fitted to ensure easy cleaning and maintain full efficiency.
Standard System Components
25ft length hoses
B-140 Chopper
With Guages
SP-85 Catalyst Slave Pump
Regulators & Filter
188913-00 11:1 ratio Material Pump
Cart, Mast & Boom mounting
User Manual
Nothing compares to the INDy in open mould processing for;
Lowest levels of styrene emmisions
Most "Workable", uniform dispense of resin and glass for quality results.
INDy gun fitted with gel coat nozzle
System Operating Specifications
Air requirements
26 cfm @ 100 psi
Chopper Output
1 strand, 5 lbs./min
2 strands 7 lbs./min
Material Pump Output
9 kg
Catalyst Slave pump Range
.5% to 4%
Telephone +44 (0)1379 642660 FAX +44 (0)1379 650304
Postal address Spa House, Shelfanger, Diss, Norfolk, IP22 2DF, England
Webmaster: W Clendening
